How to use Pdb? Whats Pdb? Python Debugger Tutorial

Original author - https://medium.com/instamojo-matters/become-a-pdb-power-user-e3fc4e2774b2 with some of my personal extension to this post.

What’s pdb?

pdb is a module from Python’s standard library that allows us to do things like:
  • Stepping through source code
  • Setting conditional breakpoints
  • Inspecting stack trace
  • Viewing source code
  • Running Python code in a context
  • Post-mortem debugging

Why pdb?

It is not necessary to use pdb all the time, sometimes we can get away with simple print statements or logging.
But these other approaches are most of the time not good enough and don’t give us enough control while debugging. Plus after debugging we also have to take care of removing the print statements that we had added to our program just for debugging purpose, this isn’t true for logging though as we can filter out logs easily. But at the end both of these approaches clutter our code and don’t give us enough debugging power either.

How to start pdb?

There are multiple ways to start pdb depending on your use case.
1. Starting program under debugger control
We can start a script itself under debugger’s control by executing the script using -m pdb argument. Let’s run script.py:
$ python -m pdb script.py
 > /pdb-mupy/script.py(1)<module>()
 -> """I am the first script in this demo"""
 (Pdb)
In this mode Python will stop the program on first line and you are going to be inside debugger((Pdb) is pdb’s prompt). At this point you can either set breakpoints or continue executing your program.
Another special thing about it is that after the program completion if no exception occurred then your program will restart in same mode otherwise it will start in post-mortem mode. After post-mortem mode you can restart the program again.
2. Running code under debugger control
Instead of running the whole code under debugger control we can run particular code under using pdb.run, pdb.runeval and pdb.runcall.
>>> import pdb
>>> import script
>>> pdb.run('script.divide(10, 5)')
> <string>(1)<module>()->None
(Pdb) s   # we can run any pdb command here
--Call--
> /pdb-mupy/script.py(6)divide()
-> def divide(numerator, denominator):
(Pdb) n
> /pdb-mupy/script.py(7)divide()
-> return numerator / denominator
(Pdb) p numerator, denominator
(10, 5)
(Pdb) c
>>>
Here <string>(1)<module>() means that we are at the start of string passed to run() and no code has executed yet. In the above example we stepped into the divide function using s(don’t worry about s, n, c etc, we will be covering them in detail).
runeval() does the same thing as run() except that it also returns the value of executed code.
runcall() allows us to pass a Python callable itself instead of a string.
>>> pdb.runcall(script.divide, 10, 5)
> /pdb-mupy/script.py(7)divide()
-> return numerator / denominator
(Pdb)
3. Set a hardcoded breakpoint
This is the most common way to debug programs, it basically involves adding the line pdb.set_trace() in the source code wherever we want our program to stop.
4. Post-mortem debugging
Post-mortem debugging allows us to debug a dead program using its traceback object. In post-mortem debugging we can inspect the state of the program at the time it died. But apart from inspecting the state we can’t do much here(like stepping through the code) because like the name suggests we are performing post-mortem of a dead program.
By default the -m pdb we had discussed earlier puts us in post-mortem mode if an exception occurs. Other ways are using: pdb.pm() and pdm.post_mortem().
pdb.pm() will take us to the post-mortem mode for the exception found in sys.last_traceback.
On the other hand pdb.post_mortem() excepts an optional traceback object otherwise will try to handle the exception currently being handled.
>>> import pdb
>>> import script
>>> script.divide(10, 0)
Traceback (most recent call last):
  File "<ipython-input-8-fe270324adad>", line 1, in <module>
    script.divide(10, 0)
  File "script.py", line 7, in divide
    return numerator / denominator
ZeroDivisionError: integer division or modulo by zero
Now to inspect the state at the time this above exception occurred usign pdb.pm().
>>> pdb.pm()
> /Users/ashwini/work/instamojo/pdb-mupy/script.py(7)divide()
-> return numerator / denominator
(Pdb) args  # Arguments passed to the function at that time
numerator = 10
denominator = 0
We could have done something similar using pdb.post_mortem() with the traceback object:
>>> import sys
>>> pdb.post_mortem(sys.last_traceback)
> /Users/ashwini/work/instamojo/pdb-mupy/script.py(7)divide()
-> return numerator / denominator
(Pdb)
Similarly we can handle the current exception being handled using pdb.post_mortem() without any argument:
>>> try:
...     script.divide(10, 0)
... except Exception:
...     pdb.post_mortem()
...
> /Users/ashwini/work/instamojo/pdb-mupy/script.py(7)divide()
-> return numerator / denominator
(Pdb)

Basic pdb commands

(Pdb) prompt we have seen so far is pdb’s own shell and it has its own set of commands that makes debugging even easier. In this section we will go through some of the basic commands.
Before starting with the commands it is important to understand the notation we use for commands, for example a command like c(ont(inue)) means we can either use c, cont or continue for this command. The square brackets([]) followed by a command are its optional arguments, without square brackets it is a compulsory argument.
  • h(elp) [command]
  • help or simply h provides help related to a pdb command. Without arguments it lists all of the pdb commands available.
  • (Pdb) help
EOF bt cont enable jump pp run unt a c continue exit l q s until alias cl d h list quit step up args clear debug help n r tbreak w b commands disable ignore next restart u whatis break condition down j p return unalias where
Get help related to args command:
(Pdb) help args
a(rgs)
Print the arguments of the current function.
This command can save your time related to visiting Python documentation in case you forgot about a command.
Note: ! command is the only exception here as help only works with valid Python identifiers. Alternative is to use help exec.
  • p or pp
To print variable inside debugger we can use p for normal printing and pp for pretty-printing. We can use simple Python print as well but it is not a pdb command.
  • a(rgs)
args prints the arguments with their values of the current function.
>>> pdb.runcall(script.divide, 10 , 15)
> /pdb-mupy/script.py(7)divide()
-> return numerator / denominator
(Pdb) args
numerator = 10
denominator = 15
  • q(uit)
To exit the debugger we can use q or quit.
  • ! statement
To run Python code in debugger we can use ! followed by the code we want to run. Without ! the code can fail if it collides with any pdb command, hence it is recommended to always use ! to run Python code.
$ python -m pdb script.py
> /pdb-mupy/script.py(1)<module>()
-> """I am the first script in this demo"""
(Pdb) !c = 2  # Define a variable named c
(Pdb) p c
2
Without ! it fails because pdb thinks we are trying to run pdb’s c command.
(Pdb) c = 2
2
The program finished and will be restarted:
> /pdb-mupy/script.py(1)<module>()
-> """I am the first script in this demo"""
(Pdb)
  • run [args ...]
run allows us to restart a program. This is helpful if we want to restart the programs with different argument without exiting the debugger.
$ python -m pdb script.py 10 5
> /pdb-mupy/script.py(1)<module>()
-> """I am the first script in this demo"""
(Pdb) !import sys
(Pdb) p sys.argv
['script.py', '10', '5']
Let’s restart this program with different arguments:
(Pdb) run 30 40
Restarting script.py with arguments:
    30 40
> /pdb-mupy/script.py(1)<module>()
-> """I am the first script in this demo"""
(Pdb) !import sys
(Pdb) p sys.argv
['script.py', '30', '40']
  • l(ist) [first[, last]]
l or list command can be used to list the source code.
Without any argument it lists the 11 lines around the current line. With one argument 11 lines around the specified line number. With two argument it lists the lines in that range, if second argument is less that first then it is taken as count.
$ python -m pdb script.py
> /pdb-mupy/script.py(1)<module>()
-> """I am the first script in this demo"""
List 11 lines around the current line:
(Pdb) list
  1  -> """I am the first script in this demo"""
  2
  3     import sys
  4
  5
  6     def divide(numerator, denominator):
  7         return numerator / denominator
  8
  9
 10     if __name__ == '__main__':
 11         numerator = int(sys.argv[1])
List lines 5 to 8:
(Pdb) list 5, 8
  5
  6     def divide(numerator, denominator):
  7         return numerator / denominator
  8
  • alias [name [command]] or unalias
alias command can be used to set aliases for commands in debugger, similarly unalias can be used to unset an already existing alias.
Let’s say we want to create an alias that returns a list of squares.
(Pdb) alias squares [i**2 for i in xrange(%1)]
(Pdb) squares 5
[0, 1, 4, 9, 16]
Here %1 is the argument that our alias expects(5 in the above example), if it expects more then we can use %2, %3 etc
We can also create aliases using existing aliases:
(Pdb) alias squares_7 squares 7
Now squares_7 is equivalent to running squares 7
(Pdb) squares_7
[0, 1, 4, 9, 16, 25, 36]
To remove an alias use unalias command followed by the command name.

Stepping through code

One of the strongest feature of pdb is that we can move through our code in various ways:
- Line by line
- Jumping inside a function
- Skip a loop
- Skip function
In this section we will learn about the commands that allow us to step through the code. The code that we will be use in this section is next_and_step_until.py. These are the commands that you will be using the most, hence it is important to have a clear understanding here.
  • n(ext)
n or simply next command runs the code on current line at full-speed and takes us to the next line in the current function.
  • s(tep)
s or step is similar to next but they vary when a callable(function etc) is involved. If a callable is there then it will step us inside that callable instead of taking us to next line in the current function. If no callable is involved then it is same as next.
  • unt(il)
until command tells the debugger to continue executing until we have reached a line number greater than the current line number. This command is helpful in exiting a loop.
  • r(eturn)
r or return takes us to the end of the current function. At global level it takes us to the last line in the module. This command is helpful you want to step through the whole function body at once.
  • c(ont(inue))
c or cont or continue command lets us run the whole code at full-speed when we are done with our debugging. If there’s another breakpoint in your program then it will stop at that next breakpoint.
Let’s debug through our script next_and_step_until.py while making use of the above commands. We have set a breakpoint on line #19 in that script and debugger will stop on next valid line: #21.
$ python next_and_step_until.py
> /Users/ashwini/work/instamojo/pdb-mupy/next_and_step_until.py(21)<module>()
-> knights()  # Just want to run this function and move on to next line? Use n(ext).
(Pdb)
Now to run the knights() function at full-speed use n(ext). As you can see it printed the statements we have inside the knights() function and stopped on the next line in the current function.
(Pdb) n
We are the Knights who say ni!
Get us a shrubbery.
> /Users/ashwini/work/instamojo/pdb-mupy/next_and_step_until.py(22)<module>()
-> credits()  # Want to step inside this function? Use s(tep).
(Pdb)
Now let’s say we want to debug something inside credits() call, for that we can use s(tep).
(Pdb) s
--Call--
> /pdb-mupy/next_and_step_until.py(11)credits()
-> def credits():
(Pdb) n
> /pdb-mupy/next_and_step_until.py(12)credits()
-> print "A Møøse once bit my sister... No realli!"
(Pdb) n
A Møøse once bit my sister... No realli!
> /pdb-mupy/next_and_step_until.py(13)credits()
-> print "We apologise for the fault in the print statements."
(Pdb)
Now that we are done with this function we can use r(eturn) to go to its end and then use n to exit:
(Pdb) r
We apologise for the fault in the print statements.
Those responsible have been sacked.
--Return--
> /Users/ashwini/work/instamojo/pdb-mupy/next_and_step_until.py(15)credits()->'M\xc3\xb8\xc...pretti nasti.'
-> return "Møøse bites Kan be pretti nasti."
(Pdb) n
> /Users/ashwini/work/instamojo/pdb-mupy/next_and_step_until.py(24)<module>()
-> for i in range(1, 5):
Now we are in a loop and both n(ext) and s(tep) can’t be used to complete it in a single step. To skip the loop we can go its last line and use unt(il).
-> for i in range(1, 5):
(Pdb) n
> /pdb-mupy/next_and_step_until.py(26)<module>()
-> print "Shrubbery #{}".format(i)
(Pdb) until
Shrubbery #1
Shrubbery #2
Shrubbery #3
Shrubbery #4
> /pdb-mupy/next_and_step_until.py(28)<module>()
-> print "We have found the Holy Grail."
(Pdb)
Now we can continue executing the program using c(ont(inue)).
(Pdb) cont
We have found the Holy Grail.

Jumping between stacks

So far we have only seen how to move forward in code by moving line by line and jumping inside a function call. But pdb also provides us functionality to jump up and down in the current stack.
Best way to demonstrate this is to use a recursive function as an example, its code can be found at recursive.py.
The three commands we will be going through in this section are u(p), d(own) and w(here).
  • w(here)
w or where prints the whole track till the most recent frame and current frame is represented using an arrow.
Let’s run our program and when it stops at the breakpoint we will use w(here) to view the whole stack trace
$ python recursive.py
> /pdb-mupy/recursive.py(10)func()
-> return 0
(Pdb) where
  /pdb-mupy/recursive.py(14)<module>()
-> print (func(4))
  /pdb-mupy/recursive.py(7)func()
-> return func(n - 1)
  /pdb-mupy/recursive.py(7)func()
-> return func(n - 1)
  /pdb-mupy/recursive.py(7)func()
-> return func(n - 1)
  /pdb-mupy/recursive.py(7)func()
-> return func(n - 1)
> /pdb-mupy/recursive.py(10)func()  # Current frame
-> return 0
(Pdb)
Here > represents the current frame.
Now we can go up and down in the stack using u(p) and (down). Let’s move up twice and then check the argument value using a(rgs). The breakpoint was set at n = 0, now when we moved up twice we have n = 2.
(Pdb) u
> /pdb-mupy/recursive.py(7)func()
-> return func(n - 1)
(Pdb) u
> /pdb-mupy/recursive.py(7)func()
-> return func(n - 1)
(Pdb) args
n = 2
(Pdb)
Similarly we can go back down using d(own):
(Pdb) d
> /pdb-mupy/recursive.py(7)func()
-> return func(n - 1)
(Pdb) args
n = 1
u(p) is also useful when you stepped(s(tep))inside a function accidentally and want to go back.

Breakpoints

So far we have only seen how to set a break-point by updating the code and adding pdb.set_trace() wherever we want to stop our program. But, pdb also provides us a way to set dynamic conditional breakpoints without updating the source code. In this section we will be using code from breakpoints.py file.
  • b(reak) [[filename:]lineno | function[, condition]]
We can set a breakpoint in the current file by specifying the line number or function name in the current file. Or we can also set breakpoint in some other file(this file should be present in module search path) by specifying the file name followed by a line number.
Each number is assigned a number and this number can be used later with other commands to access the breakpoint.
condition is a Python statement that should be True to stop at the breakpoint. This condition is executed in the scope at which we have set the breakpoint.
Few examples of setting breakpoints.
  • break 13 # Set breakpoint on line number 13
  • break divide # Set breakpoint on divide function
  • break divide, denominator == 0 # Set breakpoint in divide function only if denominator is 0
$ python -m pdb breakpoints.py 10 0
> /pdb-mupy/breakpoints.py(2)<module>()
-> import sys
(Pdb) break divide, denominator == 0
Breakpoint 1 at /pdb-mupy/breakpoints.py:5
Get list of breakpoints using b(break). Here Num = 1 is the number assigned to the breakpoint. Disp == keepmeans it is a permanent breakpoint and End = yes means this breakpoint is right now enabled.
(Pdb) break
    Num Type         Disp Enb   Where
    1   breakpoint   keep yes   at /pdb-mupy/breakpoints.py:5
        stop only if denominator == 0
    (Pdb) c
As denominator is program our program stopped under debugger control:
> /pdb-mupy/breakpoints.py(8)divide()
    -> print "Calculating {}/{}".format(numerator, denominator)
    (Pdb) args
    numerator = 10.0
    denominator = 0.0
Let’s restart the program using different arguments:
(Pdb) run 10 5
Restarting breakpoints.py with arguments:
    10 5
> /pdb-mupy/breakpoints.py(2)<module>()
-> import sys
(Pdb) c
Calculating 10.0/5.0
2.0
The program finished and will be restarted
> /pdb-mupy/breakpoints.py(2)<module>()
-> import sys
As the denominator wasn’t zero this time the program didn’t stop at the breakpoint.
(Pdb) break
Num Type         Disp Enb   Where
1   breakpoint   keep yes   at /pdb-mupy/breakpoints.py:5
    stop only if denominator == 0
    breakpoint already hit 2 times
Note: Breakpoints persist even after the auto restart or forced restart(using run) in -m pdb mode.
  • tbreak [[filename:]lineno | function[, condition]]:
tbreak allows us to set a temporary breakpoint. This breakpoint goes away as soon as it is hit once. Can be pretty useful if you want to set a breakpoint only once, say inside a loop or for the first time a function is invoked.
$ python -m pdb breakpoints.py 10 5
> /pdb-mupy/breakpoints.py(2)<module>()
-> import sys
(Pdb) tbreak divide, denominator == 0
Breakpoint 1 at/pdb-mupy/breakpoints.py:5
(Pdb) break
Num Type         Disp Enb   Where
1   breakpoint   del  yes   at /pdb-mupy/breakpoints.py:5
    stop only if denominator == 0
Notice the value of Disp this time. It is del instead of keep, means it is a temporary breakpoint.
(Pdb) c
Calculating 10.0/5.0
2.0
The program finished and will be restarted
> /Users/ashwini/work/instamojo/pdb-mupy/breakpoints.py(2)<module>()
-> import sys
Programs simply restarted because the breakpoint condition wasn’t true, now let’s make it true by restarting it with different arguments.
(Pdb) run 10 0
Restarting breakpoints.py with arguments:
    10 0
> /pdb-mupy/breakpoints.py(2)<module>()
-> import sys
(Pdb) c
Deleted breakpoint 1
> /Users/ashwini/work/instamojo/pdb-mupy/breakpoints.py(8)divide()
-> print "Calculating {}/{}".format(numerator, denominator)
(Pdb) break
(Pdb)
This time it did hit the breakpoint and was deleted as well.
  • cl(ear) [filename:lineno | bpnumber [bpnumber ...]]
We can permanently remove breakpoints using cl(ear) command.
  • disable [bpnumber [bpnumber ...]] or enable [bpnumber [bpnumber ...]]
To temporary disable a breakpoint use disable and to re-enable a breakpoint use enable. Unlike clearbreakpoints are not removed permanently in this case.
  • ignore bpnumber [count]
We can also ignore a breakpoint count number of times using ignore command. Breakpoint is re-activated when the count becomes 0.
  • condition bpnumber [condition]
To update or add condition to a breakpoint we can use the condition command.
Note: If the condition is an invalid Python code then it will be evaluated as True but in case the breakpoint was a temporary one then it won’t be deleted and if the breakpoint had an ignore count then it won’t be decremented. This is done to notify the user that something’s wrong.
  • commands [bpnumber]:
commands is a pretty useful command related to breakpoints. If used in a certain way then it can be equivalent to adding print statements in our code.
This command allows us to run multiple commands when a breakpoint is hit.
Let’s add a breakpoint on divide function and now we will print some stuff as well usingcommands.
$ python -m pdb breakpoints.py 10 5
> /pdb-mupy/breakpoints.py(2)<module>()
-> import sys
(Pdb) break divide
Breakpoint 1 at /Users/ashwini/work/instamojo/pdb-mupy/breakpoints.py:5
In commands mode the prompt is (com). To end the commands use end.
(Pdb) commands 1
(com) args
(com) p "Inside divide()"
(com) end
(Pdb) c
numerator = 10.0
denominator = 5.0
'Inside divide()'
> /pdb-mupy/breakpoints.py(8)divide()
-> print "Calculating {}/{}".format(numerator, denominator)
Now as you can see our program printed few things on hitting the breakpoint.
We can also use commands like cont, next etc. But these commands will also act as end because these commands can lead us to next breakpoint which may have its own set of commands and then debugger will be confused about whose commands to run next.
Another commands is silent, when this command is part of commands list then you won’t see the message we get at a breakpoint.
$ python -m pdb breakpoints.py 10 5
> /pdb-mupy/breakpoints.py(2)<module>()
-> import sys
(Pdb) break divide
Breakpoint 1 at /pdb-mupy/breakpoints.py:5
(Pdb) commands 1
(com) args
(com) p "Inside divide()"
(com) silent
(com) cont
(Pdb) c
numerator = 10.0
denominator = 5.0
'Inside divide()'
Calculating 10.0/5.0
2.0
The program finished and will be restarted
> /pdb-mupy/breakpoints.py(2)<module>()
-> import sys
(Pdb)
As you can see above the program didn’t stop at the breakpoint this time due to cont command and we didn’t see the lines(shown below) related to breakpoint either due to silent command:
> /pdb-mupy/breakpoints.py(8)divide()
-> print "Calculating {}/{}".format(numerator, denominator)

Tips and tricks

  • .pdbrc file: If present the commands present in this file are ran at the start of debugger session. This file can be added to your home directory and/or current directory.
  • Plain enter repeats the last command(list command is an exception).
  • To enter multiple commands on a single line use ;; as separator.

What’s new in Python 3

Python 3.3+
  • Tab-completion via the readline module is available for commands and command arguments.
Python 3.2+
  • pdb.py now accepts a -c option that executes commands as if given in a .pdbrc file
  • A new command ll can be used to see the source related to the current function or frame.
  • A new command source can be used to see the source code of an expression: source expression.
  • A new command interact can be used to start interactive shell in debugger using the globals() and locals() in the current frame. This can be done in Python 2 using !import code; code.interact(local=vars())

Here is a table of useful pdb commands along with their short forms to keep in mind while working with the Python debugger.
Command Short form What it does
args a Print the argument list of the current function
break b Creates a breakpoint (requires parameters) in the program execution
continue c or cont Continues program execution
help h Provides list of commands or help for a specified command
jump j Set the next line to be executed
list l Print the source code around the current line
next n Continue execution until the next line in the current function is reached or returns
step s Execute the current line, stopping at first possible occasion
pp pp Pretty-prints the value of the expression
quit or exit q Aborts the program
return r Continue execution until the current function returns

Comments

Popular posts from this blog

SOX - Sound eXchange - How to use SOX for audio processing tasks in research.

How to get video or audio duration of a file using ffmpeg?

Sox of Silence - Original post - http://digitalcardboard.com/blog/2009/08/25/the-sox-of-silence/