Latex Tips for publishing papers

-

LaTeX tips to meet publication page limits

Any print publication will naturally have a page limit for articles it publishes. I use LaTeX for typesetting my papers, and I’ve put together here a collection of tricks I use to squeeze space out. I’ve sorted them roughly in decreasing order of effectiveness.

Do this first

  • Decrease the document’s font size to the lowest allowed size. For example, \documentclass[10pt]{article} reduces your document’s font to 10 points if you’re using the article document class.
  • If you’re using the article document class, add \usepackage{fullpage} to your preamble. As its name suggests, this package shrinks the margins and uses more of each page.
  • Convert display math (equation, eqnarray, etc.) to inline math ($ $), wherever possible.

Decrease the font size used for references

It is common for print journals to use a smaller font for references than normal text. But the default style files for conference papers (like ACM‘s sig-alternate.cls) often don’t do this. You can do this yourself by enclosing the bibliography portion of your document with a LaTeX font size environment like this:

\small{
    \bibliography{mybibliographyfile.bib}
}

To make the references even smaller, use \scriptsize instead of \small, but I don’t recommend using smaller font sizes.

Reduce spacing by changing environment variables

LaTeX uses certain default values set by the style-sheet to determine, for example, the spacing between items in a list, before and after equations, before and after figures, etc. This document on Squeezing Space in LaTeX gives a list of such variables you can manipulate. They usually involve adding a negative amount of space to an existing environment variable. For example:
\addtolength{\itemsep}{-0.05in}
The above code reduces the separation between items in a list by 0.05 inches. The right amount to add can only be found by trial and error. I’ve found that it is most effective to change the following variables: \itemsep (about 0.1 in), \topsep(about 0.07 in), \textfloatsep(about 0.05 in), \intextsep(about 0.05 in), \partopsep(about 0.03 in), \parskip(about 0.02in)
Note that sometimes, adding a more negative amount does not seem to reduce spacing, and when pushed beyond a point, the typesetting gets totally messed up. Use this technique in moderation.

Using \vspace

This is a more direct method to cut down spacing exactly where you need it. It is best illustrated with an example:

This is the end of a paragraph.
\vspace{-0.2in}
\begin{figure}[h]

This cuts down the space between the end of a paragraph and the figure that follows it.

Use the space meant for author information

If you are submitting a paper for a double blind-reviewed conference, you will not be revealing the author names and affiliations. But the style file often reserves a certain amount of space for it, even if you don’t specify any author information. The only way around is to edit the style file itself. This is how you can do it for ACM’s sig-alternate.cls (Note: you make such modifications at your own risk, I have only tested this for v1.6 of the class file).
  • Find the line \advance\topmargin by -37 pt. Change the 37 to 47.
  • Find the line %This should be the subtitle. Comment the next six lines.
  • Find the line ending with % Increased space for title box -- KBT, and comment it.
  • Comment the line \newtoks\copyrightnotice.
  • Skip the next three lines. Comment the next six lines (\begin{center} to \end{center}).
  • Find the line starting with \def\@toappear{}. Comment this line, and the next six lines (up to and including the line that begins with \def\conferenceinfo.)
  • Find the line starting with \newtoks\copyrtyr. Comment this line, and the next seven lines (up to and including the line that begins with \def\permission.)

Fix paragraphs that end at the beginning of a column

In any document, it is common to have paragraphs where the last character is at the beginning of a column. Often, it is possible to shorten that paragraph just enough to make the paragraph end in the previous line instead, thus saving one entire line. Browse you entire document looking for such paragraphs, and fix as many as you can.

Convert oversized tables into images

Sometimes, we have tables that span more than one column, but does not really need two columns. For example, the following table may not fit into a single column.

\begin{table}
\centering
\begin{tabular}{l l l l l l l}
    BlahBlah & BlahBlah & BlahBlah & BlahBlah & BlahBlah & BlahBlah & BlahBlah\\
\end{tabular}
\caption{BlahBlah table}\end{table}
But, we can use the same trick we use for resizing images to make this table fit into, say 90% of the column width, like this:

\begin{table}
\centering
\resizebox{0.9\columnwidth}{!}{
    \begin{tabular}{l l l l l l l}
        BlahBlah & BlahBlah & BlahBlah & BlahBlah & BlahBlah & BlahBlah & BlahBlah\\
    \end{tabular}
}
\caption{BlahBlah table}
\end{table}

Shrink images

This obvious trick is, IMO, the main cause of illegible conference papers, but sometimes, there is no other choice. Shrink your images using your favorite LaTeX graphics package till the text size on the figure is about the same size as the main text.

Bibliography

For bibliography use
 
\bibliographystyle{unsrt}
\bibliography{Bib_Filename_without.bib_here}

Use \cite{reference_name} wherever you wish to cite the reference and compile in latex with bibtex enabled. The option for TexMaker is PdfLaTeX + Bib(la)tex + PdfLaTeX(x2) + View Pdf that one can find in the Options > Configure TeXMaker > Quick Build option

Create the .bib file that is present in the same folder as the parent tex file.


For the .bib file try to search for the paper in Google Scholar to get citations faster.
There is a Cite option in every paper result that Google Scholar displays. Use Bibtex in bottom of the Cite option pop that comes up. Copy this citation as it in the .bib file.Use comma as the separation for the paper citations in the bib file.
In case you dont find the desired paper on Google Scholar which is pretty rare :)
unless its IEEE papers that are not meant to be publicly available. Then go to the IEEE Xplore page and search for the paper. You will have the download citation option for the paper that is present on the webpage.
And there your file of .bib will be ready in minutes.

-------------------------------------------------------------------------------------------------------------------------------

Like the post. Leave comments.



Comments

Post a Comment

Popular posts from this blog

SOX - Sound eXchange - How to use SOX for audio processing tasks in research.

-
This article is part of the on-going Software for Geeks series. SoX stands for So und e X change. SoX is a cross-platform command line audio utility tool that works on Linux, Windows and MacOS. It is very helpful in the following areas while dealing with audio and music files. Audio File Converter Editing audio files Changing audio attributes Adding audio effects Plus lot of advanced sound manipulation features In general, audio data is described by following four characteristics: Rate – The sample rate is in samples per second. For example, 44100/8000 Data size – The precision the data is stored in.  For example, 8/16 bits Data encoding – What encoding the data type uses. For example, u-law,a-law Channels – How many channels are contained in the audio data.  For example, Stereo 2 channels SoX supports over 20 audio file formats. To get the list of all supported formats, execute sox -h from the command line. One of the major benefits of a command-line...
Read more

Sox of Silence - Original post - http://digitalcardboard.com/blog/2009/08/25/the-sox-of-silence/

-
Image
The SoX of Silence SoX is, by their own definition,  the Swiss Army knife of audio manipulation. And no doubt it’s full of fun with slicing and dicing and playback and recording and filtering and effects capabilities. But SoX is a command line tool, which means obscure syntax and parameters in order to get things done. I’ve been trying off and on for months to try to understand the  silence  filter from within SoX, which allows one to remove silence from the beginning, middle, or end of the audio. Sounds, simple, doesn’t it?  Well, it should be. Below is the  man page for the  silence  filter : silence  [-l] above-periods [duration threshold[d|%] [below-periods duration threshold[d|%]] Removes silence from the beginning, middle, or end of the audio. Silence is anything below a specified threshold. The above-periods value is used to indicate if audio should be trimmed at the beginning of the audio. A value of zero indicates no...
Read more

How to get video or audio duration of a file using ffmpeg?

-
Today we will learn How to get the duration of a file using ffmpeg 1. Format Container Duration - [This works for both Video and Audio Files - better to report numbers using this command] ffprobe -v error -show_entries format=duration \ -of default=noprint_wrappers=1:nokey=1 input.mp4     2. Video Stream Duration - [This works only for Videos]   ffprobe -v error -select_streams v:0 -show_entries stream=duration \ -of default=noprint_wrappers=1:nokey=1 input.mp4     Content author - https://superuser.com/questions/650291/how-to-get-video-duration-in-seconds
Read more